HermaTech Mechanical Corp.

Hercules .24/35b Lathe

SPECIFICATIONS

Length of Bed....................................................... 16ft
Swing over Saddle................................................ 20"
Swing over Bed.................................................... 32" Dia.
Width of Bed........................................................ 18"
Hole through the Spindle...................................... 36" & 2.3/4" Dia
Range of Spindle Speeds...................................... 25 ~ 1250 R.P.M.
Longitudinal Feeds............................................... .0012 To 1.3/4"
Inches Threads .................................................... 2 Tpi To 84 Tpi
Lead Screw dia. * Threads Pitch.......................... 1/4 X 7 TPI
Floor Space Required .......................................... 3.5ft X 20ft
Lead screw pitch .................................................. 3" Pitch

Extra Items:

4 Jaw Chuck 23.5"
Soft Steady Rest
Wheeled Steady Rest
Follower Rest

PRICE $14’500.-- +GST

Long bed lathe is in good working conditions. It has rapid traverse for the tool post carriage. Machine is made in Italy.

Cincinatty Cylindrical Grinder

SPECIFICATIONS

Table Size ...................................70" X 10"
Working area of table.................. 57"
Working Dia from Center............ 8.5"
Grinder Wheel Dia. .................... 11"
GDP 315 Digital Operator

PRICE $9’500.-- +GST

Clean and good working condition and ready to go to work. A variable head stock drive makes it easy to adjust your surface speed on the fly. There are extra grinding wheels and a manual.

Reckerman Vertical & Horizontal Mill

SPECIFICATIONS

18 Diffrent Table Speeds
Table Size ....................................................... 95"L X 15.5"
Y-Axis, Table Travel ...................................... 15.5"
X-Axis, Table Travel ...................................... 50"
Z-Axis, Table Travel ....................................... 20"
Range of Spindle Speeds................................. 22U/m to 1200U/min R.P.M.
Spindle Type & Taper ..................................... Milling machine taper , #50

Manual & Assisted controls
DRO

PRICE: $14’500.-- +GST

Universal milling machine, very solid. Does not include hydraulic vise shown in the picture. Needs minor repairs on joy stick for rapid traverse. Also requires clearance hole in floor for table spindle. Feed rate are in mm. Comes with a digital read out system.

SCHARMANN Floor Type Horizontal Boring Mill

SPECIFICATIONS

BORING MILL:

Age: 1960
Model: NA
Serial Number: 7461/60
Floor Space: 143" X 249" X 161"

Spindle Diameter ................................................. 5"
Taper In Spindle .................................................. Morse taper #6
Y-Axis, Vertical Head Travel .............................. 68"
X-Axis, Column Travel ....................................... 68"
W-Axis, Spindle Travel ....................................... 47.8"
Z-Axis, Column Infeed Travel ............................ 9.5"
B-Axis, Rotary Table .......................................... 360 Degrees
Spindle Speeds .................................................... 3.4 to 2880 RPM
Feeds: X,Y,Z,W Axes ......................................... .0016 to 1.58 IPM
Bed Width ............................................................ 51" X 141"

ROTARY TABLE:

Table Size L x W .................................................. 59" x 79"
B-Axis Rotation ................................................... 0" x 360" Degrees
Table Working Height .......................................... 41.5"
Table Rotation B-Axis Feed ................................. .0016 to 1.58" IPM

EQUIPPED WITH:

tooling and line boring bars

PRICE: 45’000.-- +GST

Large heavy duty boring mill in good working condition and ready to go to work. Includes all of different size boring bars and tool holders. Has a built in 360 degr. Rotary table and large face plate. There are different line boring bar adapters for the support tower.

Lapping Table

SPECIFICATIONS

Laping Disk Dia. ................................................. 36"
Table Size LXWXH............................................. 48" x 49" x 73"
3 Guide Arms
Intermatic Controls
2 Guide Colures
Electric Driven mixer and release

PRICE: $3’500.-- +GST

Large 36” lapping plate. Great for finishing metal to metal seal surfaces. Includes 3 rings and keepers and is equipped with compound mixer. Plate needs resurfacing for accurate flatness.

Spray Welder/Lathe & Gear

LISTED ITEMS

1 MetcoSeal APT
3 MetcoCream #25040
1 Bab*Tec # 29240
2 ADP Thinner
1 Spram Castion Metal Alloy #14112
1 Artec Alloy Sealer
1 Artec Alloy Metco 452
6 Artec Alloy #3000, #3028, #3055, #3060
2 Castolin Eutectic 23045-5k
1 Colmonoy FuseWeld Powder #43 Rockwell C35-40
1 Colmonoy FuseWeld Powder #63 RockWell C68-63
1 Castolin Eutectic Large Bab*Tec #29240
4 Arctec Alloys Limited Ecoface Spray Powders p199, p222
3 Canada Metal Trinrite
1 Acetone
1 Dry Graphite Lubricant
Numerous Bonds and mixing bottles
Tinted Abrasion Glasses
Multiple torch and Spray Heads, Attachments, and 4 spray wire Bundles
1 8E Metco Spray Gun

Spray Lathe

Lenght of Bed..................................100"
Height of Center...............................19" over saddle
Capacity ...........................................36” x 72”

PRICE: $5’500.-- +GST

Complete set up with variable speed metalizing lathe to metalize, apply hot fuse coatings including wire and powder systems. All contained in a portable cabinet with flow controls and a space to hold Oxygen and Acetylene tanks.